5
| P
age 47 | SEABOB Operator's Manual |
5.7.1 Setting the maximum diving depth
The diving depth limit is factory set to 2.5 m / 8 ft (depth
limit with safety cut-off). If you want to dive to greater
depths, you can increase the diving depth incrementally
up to the maximum diving depth. The maximum possible
diving depth is 40 m / 131 ft.
Only divers with an appropriate diving license are al-
lowed to increase the maximum diving depth of 2.5 m / 8
ft with the purpose of diving to a greater programmable
depth.
To set the maximum diving depth, proceed as fol-
lows:
1. Switch on the SEABOB (the device should be ready
for operation). The Information Display appears on
the display.
2. Tap the button combination silver – blue – red in
quick succession.
3. Enter your Owner-PIN and confirm your entry by
pushing the Trigger (see Chapter 5.3.10 "Entering
PIN"). The menu containing various menu items (up-
per menu level) will appear.
4. Switch between the menu items (upper menu level)
with the green or red button until the maximum div-
ing depth ("diving depth") is displayed in white. Se-
lect it by pushing the Trigger.
5. To increase the maximum diving depth, tap the green
button (repeatedly).
6. To decrease the maximum diving depth, tap the red
button (repeatedly).
7. Push the Trigger against the Control Grip to confirm
the new setting and return to the upper menu level.
8. To exit the upper menu level, switch between the
menu items with the green or red button until the
menu item to exit the menu appears ("exit"). Push
the Trigger to return to the Information Display.
For safety reasons, the factory-set depth limit of 2.5 m / 8
ft can only be changed by first entering your Owner-PIN.
This is done to prevent the setting of the maximum div-
ing depth from being changed by unauthorized persons.
After you have finished scuba diving to a depth of more
than 2.5 m / 8 ft, reset the maximum diving depth im-
mediately to the default safety setting of 2.5 m / 8 ft to
prevent the risk of injury to others.
For safety reasons, the depth limit is
automatically reset to the default setting of 2.5 m / 8 ft
each time the SEABOB is switched on.
Bear in mind that the SEABOB switches off automatically
(Sleep mode) if inactive for a period of more than 10 min-
utes (Time-off). After switching the SEABOB back on, you
will need to re-enter your Owner-PIN if you want to start
the motor at a diving depth of more than approx. 2.5 m
/ 8 ft. After entering your Owner-PIN, you can increase
the depth limit again so that the set maximum diving
depth is greater than the one currently shown. The diving
depth display and the warning symbol will start flashing
as soon as you exceed the depth limit.
