5
| P
age 36 | SEABOB Operator's Manual |
Automatic switching off to the Sleep mode (Time-
off):
If no actions are performed by the user within 10 min-
utes (Time-off), the system will switch off automatically
to the Sleep mode.
Manual switching off to the Sleep mode:
You can also manually put the SEABOB into the Sleep
mode. To do so, proceed as follows:
1. The Information Display is shown on the display. The
power is displayed as “0 %” on the power display.
2. Tap the button combination silver – blue in quick
succession. The prompt "sleep mode - confirm with
trigger" appears.
3. If the user activates the Trigger within 5 seconds, the
system will switch to the Sleep mode and switch off.
Tip:
If the Trigger is not activated within 5 seconds, the
system will return to the last selected mode (e.g. Infor-
mation Display in the On mode).
5.3.7 Charge mode
The charger is connected to the device and is supply-
ing the charging voltage. Before charging begins, a
battery / charge diagnostic check (system check) is
performed. Charging is activated once the diagnostic
check has been completed successfully. It is not possible
to switch on the motor. The charge display showing the
battery symbol will appear in the display (see Chapter
5.3.8 "Charge display").
The system can only be switched from another mode to
the Charge mode using a connected and active charger.
Tip:
If the charger is disconnected from the device,
thereby interrupting the charging voltage, the SEABOB
switches off after 5 seconds (system check) and switches
to the Off mode (if programmed to partial charging) or to
the Sleep mode (if programmed to full charging).
