5
| P
age 39 | SEABOB Operator's Manual |
Incorrect PIN
To enter the PIN, you must use the four buttons and
confirm your entry with the Trigger:
1. Tap the red button (repeatedly). The digit under the
cursor decreases.
2. Tap the green button (repeatedly). The digit under the
cursor increases.
3. Tap the blue button (repeatedly). The cursor moves to
the left.
4. Tap the silver button (repeatedly). The cursor moves
to the right.
5. Push the Trigger against the Control Grip. Entry of the
PIN is confirmed, and the system checks to make sure
the PIN is correct.
6. If the PIN is invalid, the display is reset to "0000" and
the PIN must be entered once again ("incorrect PIN").
Tip:
If a valid PIN is not entered within 10 seconds, the
system reverts to the previous mode (e. g. "Information
Display").
5.3.11 Settings (menu)
1. The system is in the On mode. The Information Display
is shown on the display. The power is displayed as "0
%" in the power display.
2. Tap the button combination silver – blue – red in
quick succession (within 2 seconds). The Owner-PIN
prompt will appear.
3. Enter your Owner-PIN and confirm your entry by
pushing the Trigger (see Chapter 5.3.10 "Entering
PIN"). The menu containing various menu items (up-
per menu level) will appear.
The following settings can be adjusted individually via
the menu:
• Maximum diving depth ("diving depth"): see Chapter
5.7.1 "Setting the maximum diving depth"
• Maximum power ("max. power level")
• Operating time limit ("timer")
• User PIN ("user PIN"): see Chapter 5.3.10 "Entering
PIN (Owner PIN / User PIN)"
• Display brightness ("display")
• Date / time ("date / time")
• System data (serial numbers, hardware and software
versions ) ("system data"): Chapter 5.3.9 "Displaying
serial numbers"
• Exit ("exit")
Upper menu level
