5
| P
age 40 | SEABOB Operator's Manual |
For safety reasons, the depth limit
("diving depth") is automatically reset to the default set-
ting of 2.5 m / 8 ft each time the SEABOB is switched on.
Tip:
With the exception of the maximum diving depth
setting, all other settings remain permanently saved
(even after being switched off into the Sleep mode / Off
mode). The settings can only be changed by first entering
the Owner PIN via the menu.
Tip:
To protect untrained and inexperienced users from
the risk of collision or injury at high power, it is possi-
ble to restrict the maximum power in the menu. Conse-
quently, the operator can only switch the power up to
the maximum power which has been set. The maximum
power is factory set to the highest gear ("max. power
level" = "4").
Tip:
If you do not want to limit the operating time, leave
the Timer deactivated or deactivate it after usage, by re-
setting the actual timer value to "0.00 h". If the Timer
has been activated, the SEABOB switches to the greatly
reduced emergency mode immediately after the operat-
ing time has elapsed, regardless of the remaining battery
charge state.
Exit upper menu level
4. Switch between the menu items (upper menu level)
with the green or red button. The active menu item
is shown in white. Select the desired menu item by
pushing the Trigger.
5. Depending on the menu item selected, a select list or
an Input Screen will appear. Select the desired value
or enter the desired value.
Use the green or red button to scroll between the indi-
vidual preset values in the select list (maximum diving
depth, maximum power, display brightness).
The value shown under the cursor on the Input Screen
(operating time limit, User PIN, date / time) can be in-
creased by (repeatedly) tapping the green button, and
decreased by (repeatedly) tapping the red button. Move
the cursor to the left by tapping the blue button, move
the cursor to the right by tapping the silver button.
6. Push the Trigger to confirm the new settings and re-
turn to the upper menu level.
7. To exit the upper menu level, switch between the
menu items with the green or red button until the
menu item to exit the menu appears ("exit"). Push
the Trigger to return to the Information Display.
Input Screen
Select list
