5
| P
age 38 | SEABOB Operator's Manual |
5.3.9 Displaying serial numbers
1. Switch on the SEABOB. The Information Display ap-
pears on the display.
2. Tap the button combination silver – blue – red in
quick succession.
3. Enter your Owner-PIN and confirm your entry by
pushing the Trigger (see Chapter 5.3.10 "Entering
PIN"). The menu containing various menu items (up-
per menu level) will appear.
4. Switch between the menu items (upper menu level)
with the green or red button until the system data
("system data") are displayed in white. Select it by
pushing the Trigger.
5. The serial numbers of the SEABOB (the first letter is
an "S") and batteries (the first letter is an "A"), as
well as the software versions, can be displayed by
scrolling with the green and red button.
6. Push the Trigger against the Control Grip to return to
the upper menu level.
7. To exit the upper menu level, switch between the
menu items with the green or red button until the
menu item to exit the menu appears ("exit"). Push
the Trigger to return to the Information Display.
5.3.10 Entering the PIN (Owner-PIN /
User-PIN)
Owner-PIN:
This PIN (Personal Identification Number) of the owner is
used to change the settings in the menu or to switch on
the device (if PIN prompt has been activated).
User-PIN:
This PIN (Personal Identification Number) of the user is
used to switch on the device (if PIN prompt has been
activated).
Tip:
Please find your Owner-PIN on the supplied certifi-
cate.
The PIN prompt when switching on the device is deac-
tivated in the factory. This means that you will be able
to switch the SEABOB on without entering a PIN. If you
want to activate the PIN prompt when switching on the
device, or if you want to activate and change the User-
PIN, proceed as described in Chapter 5.3.11 "Settings".
If the PIN prompt has been activated (PIN > "0000"),
the user will be required to enter the PIN when switch-
ing on the device. To switch on the SEABOB, you can
use either the User-PIN or Owner-PIN. Since you are the
SEABOB owner, you can use either PIN, so that you only
have to remember one number. The owner of the craft
provides the user only with the User-PIN for switching on
the SEABOB. The Owner-PIN is the only PIN that can be
used for safety settings, in particular the maximum diving
depth, maximum power and operating time limit.
Entering PIN
SEABOB serial numbers
