ALL RADIO TRANSMITTERS DELETING
Press and kepp pressing the button P2 (PCode).
LEDP will start a sequence of flashes.
Wait that the led stops to flash and release the button
P2 (PCode).
P2
LEDP
P2
LEDP
LEDP will flash 6 times in order to confirm the correct deleting.
RADIO TRANSMITTERS MEMORIZING
With this control unit all radio transmitters of the
SMART and HEAD
series
and the radio transmitters
COCCIENELLA DIP and COPY
can be used.
RADIO TRANSMITTER MEMORIZING TO START
.
WARNING
: if you enter a code which is already memorized
RADIO TRANSMITTER MEMORIZING TO PEDESTRIAN START
1)
.
WARNING
: if you enter a code which is already memorized
Press the button P2 (PCode). LEDP will switch on.
If no further code is memorized within 10 sec. The led will switch off automatically, getting out of the memorizing procedure
, it will be deleted (4 flashes).
Press the button P2 (PCode). LEDP will switch on.
2) Press the button P1 (PTime). LEDP will start to flash quickly.
If no further code is memorized within 10 sec. The led will switch off automatically, getting out of the memorizing procedure
, it will be deleted (4 flashes).
P1
Give an impulse with the radio transmitter, using the button which will be linked to
the pedestrian start impulse.
The Led will execute 2 long flashes in order to confirm the correct memorizing of
Tx and afterwards it will keep switching on waiting for new transmitters.
SWING 2
P2
Give an impulse with the radio transmitter, using the button which will be linked to
the START impulse.
The led will execute two flashes Tx code and afterwards it will keep switching on
waiting for new transmitters.
P2
P2
LEDP
LEDP
LEDP
P2
1)
2)
LEDP
LEDP
35
Make sure that on CMR connector is installed the receiver with the same frequency of the radio
transmitter that you want to use.
English
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
®
REV 07 - 05/2009
