Sea-doo 210 Challenger, Operator'S Manual

Page: 50 / 168

CONTROLS
lmo2010-003-016_a
1. Tether cord clip secured to emergency
engine stop switch
WARNING
Always attach the tether cord to
the operator using its Personal
Flotation Device (PFD) or a wrist
strap before starting the engine.
lmo2010-003-009_a
1. Tether cord
2. Tether cord secured to PFD
3. Tether cord secured to switch
If emergency engine shut off is re-
quired, pull tether cord clip off the
switch.
WARNING
Directional control is reduced
when throttle is decreased and
lost when engine is OFF. Always
remove tether cord clip when boat
is not in operation.
4) Ignition Switch
The ignition switch is located to the
left of steering wheel. It is a 3-position
switch.
lmo2010-003-013_a
IGNITION SWITCH POSITIONS
1. OFF
2. ACCESSORIES (lights and radio)
3. ON
Two keys are provided with your boat.
Insert key in switch and turn to the de-
sired position. To remove key, turn key
to OFF position then pull it out.
NOTICE
If the key does not turn
easily, do not force it. Pull it out and
reinsert key.
NOTE: When turning the key to OFF
position, the boat electrical system will
take a few seconds to shut down.
WARNING
If you turn the ignition switch to
OFF, it shuts off the engines and
directional control is lost.
The ACCESSORIES position allows
the operation of the deck lights and
the radio. Remember that having the
accessories on without the engines
running discharges the battery.
The ON position activates the com-
plete electrical system. The ON posi-
tion allows engines starting.
Always turn ignition key to the OFF po-
sition after engine has been stopped.
NOTE: While engine can be stopped
by turning ignition key to OFF position,
we recommend the engine be stopped
by pressing the engine stop button.
48
______________