Sea-doo 210 Challenger, Operator'S Manual

Page: 62 / 168

GAUGES
n i
M A
h /l a g M P R
p a l
lmo2010-003-096
2. Press and hold the SET button until
the time is reset to 0 (zero).
Multifunction Display
When the boat is being operated, the
multifunction display provides an indi-
cation of compass heading or scrolling
messages from the monitoring sys-
tem.
It also displays a menu for the selec-
tion of various functions which, permit
changing the numerical display indi-
cation, system modes of operation,
settings, and displaying system fault
codes.
WARNING
Selecting various numerical dis-
plays, system modes of opera-
tion or changing settings should
only be carried out with the boat
stopped. Selecting these various
functions while operating the boat
at speed is not recommended as
it deters your attention from situa-
tional awareness.
n i
M A
h /l a g M P R
p a l
lmo2010-003-028
MULTIFUNCTION DISPLAY - COMPASS
HEADING INDICATED
Selecting Functions
When operating at speed, the multi-
function display normally provides an
indication of the compass direction and
azimuth the boat is traveling.
To select the various functions avail-
able through the multifunction display,
press the MODE button repeatedly un-
til the desired function is visible:
– SKI MODE
– CRUISE MODE
– DOCKING
– LAP TIME
– DISPLAY
– FUEL ECONOMY
– FAULT CODES
– SETTINGS
– SYNCHRONIZATION.
Then press the SET button to enter that
function.
NOTE: The fault code function is avail-
able only when there is an active fault.
The settings function is only available
when the engine is shut off. The syn-
chronization function is shown only. It
can not be modified.
Depth Sounder Indicator
The numerical display can be selected
to provide an indication of the water
depth.
The system is capable of indicating wa-
ter depth under the hull in single incre-
ments up to 50 m (164 ft).
60
______________