Sea-doo 210 Challenger, Operator'S Manual

Page: 54 / 168

CONTROLS
lmo2010-003-024_a
1. Heating system switch
12) Ballast System Switch
(210 WAKE)
The ballast bag allows you to fill up to
272 kg (600 lb) of water in minutes at
the touch of a button.
WARNING
The added weight of the ballast af-
fects the handling characteristics
of the boat. Do not perform high
speed maneuvers when ballast
bag contains water. Furthermore,
it is then not recommended to op-
erate the boat at speeds of more
than 50 km/h (30 MPH).
This switch is located on driver's con-
sole at the right of steering wheel,
above the ignition switch.
lmo2010-003-024_b
1. Ballast switch
This is a 3-position switch.
1
2
3
A25H05A
1. FILL
2. OFF
3. EMPTY
Raise switch stem to fill up the ballast
bag.
Lower switch stem to empty the bal-
last bag.
NOTE: The ignition switch must be in
the ACC or ON position to allow ballast
system operation.
13) MODE Button
This button is located on driver's con-
sole at the right of steering wheel, be-
low the analog fuel gauge.
Press this button to scroll various func-
tions through the digital screen in the
information center.
lmo2010-003-023_b
1. MODE button
2. Analog fuel gauge
For further details on the information
center and the display modes, refer to
INFORMATION CENTER
.
14) SET Button
This button is located on driver's con-
sole at the right of steering wheel, be-
low the analog fuel gauge.
52
______________