Sea-doo 210 Challenger, Operator'S Manual

Page: 60 / 168

GAUGES
n i
M A
h /l a g M P R
p a l
lmo2010-003-098
CLOCK
3. Press the SET button again, the
message CHANGE CLOCK will be
displayed.
n i
M A
h /l a g M P R
p a l
lmo2010-003-099
CHANGE CLOCK
4. Use UP and DOWN switch to adjust
the clock.
5. Press MODE or SET button to save
the clock and return to the main dis-
play.
n i
M A
h /l a g M P R
p a l
lmo2010-003-100
MAIN DISPLAY
Changing Numerical Display
Indication
To change the indication in the numeri-
cal display, press the MODE button re-
peatedly until DISPLAY is visible in the
multifunction display.
n i
M A
h /l a g M P R
p a l
lmo2010-003-027
DISPLAY MENU
Move switch stem up or down until the
preferred indication selection is visible
in the multifunction display.
Press the SET button to select and
save the preferred indication, or wait
for the display function to time out.
The last indication visible will be auto-
matically save. The numerical display
will then switch to the new indication
with a small abbreviation of the indica-
tion type to its right:
– FT or M
– RPM
– MPH or Km/h
– °F or °C
– Lap
– Gal/h or L/h
– Min
– AM or PM.
For example, to display the ALTITUDE
information:
– Press the MODE button repeatedly
until DISPLAY is displayed
– Then press SET button once
– Lift up the UP and DOWN switch un-
til ALTITUDE is displayed
– And finally, press SET button to con-
firm and save your selection.
58
______________