Scout Boats
9-1
Storage or winter lay-up requires special preparation to prevent damage to
the boat. Perform all annual maintenance at this time.
Without proper preparation, storage for long periods of time may cause
internal parts of the engine and drive unit to rust because of lack of
lubrication. Or, if the boat is stored in below freezing temperatures, water
inside the bilge or cooling system may freeze causing damage. Damage to
the boat due to improper storage will not be covered by the warranty. The
following procedures should help prevent damage to your boat.
STORAGE PREPARATION
While The Boat Is Still In The Water
1. Fill fuel tank and add the proper amount of fuel stabilizer and
conditioner according to the manufacturer’s recommendations.
2. Operate boat for at least 15 minutes to be sure that treated fuel has
reached engine.
NOTICE
If the boat is to be stored for more than 5 months, stored in a
high moisture (humidity) environment, in temperature
extremes, or stored outdoors, “fog” the engine with a rust
preventative fogging oil according to the manufacturer’s
recommendations. See your dealer.
When The Boat Is Removed From The Water
NOTICE
Remove the bilge drain plug immediately after taking the boat
out of the water. After washing, raise the bow of the boat high
to allow as much water as possible to drain while performing
other storage preparations.
Storage
Chapter 9
Scout Boats Section 9.qxd:Scout Boats Section 9.qxd 5/11/07 5:43 AM Page 1
Summary of Contents for 145
Page 40: ...Scout Boats 2 10 Chapter 2 ...
Page 76: ...Scout Boats 6 8 6 Chapter 6 ...
Page 102: ...Scout Boats 10 8 Chapter 10 ...
Page 111: ......
