Scout Boats
7-11
Take care not to spill gasoline. If gasoline is accidentally
spilled, wipe up all traces of it with dry rags and immediately
dispose of the rags properly onshore. When fueling:
2. Extinguish cigarettes, pipes, stoves, and all other flame producing items.
3. Make sure all power is off, and do not operate any electrical switches.
4. Place a suitable container beneath the separator element to catch fuel
spillage.
5. Unscrew the separator element using care not to spill fuel.
6. On shore, pour the contents of the element into a clear plastic or glass
container.
7. If dirt or water is seen, replace the element. Properly dispose of the old
element.
8. Apply a light coating of SAE 5W-30 motor oil to the o-ring gasket of the
element.
9. Install the element in accordance with manufacturer’s directions.
STEERING SYSTEM
The steering system is the primary link for engine control and must be
inspected and maintained regularly. The hardware at both the helm and
engine end of the steering cable must be checked frequently for tightness.
Refer to the engine operator’s manual for the appropriate torques.
The steering bar must be lubricated monthly to ensure smooth operation.
Turn the steering wheel to a full starboard turn to expose the bar. Use a high
quality waterproof marine grease and fully coat the bar. Turn the steering
wheel back and forth to work the grease in.
CAUTION
Care and Maintenance
Scout Boats Section 7.qxd:Scout Boats Section 7.qxd 5/11/07 5:42 AM Page 11
Summary of Contents for 145
Page 40: ...Scout Boats 2 10 Chapter 2 ...
Page 76: ...Scout Boats 6 8 6 Chapter 6 ...
Page 102: ...Scout Boats 10 8 Chapter 10 ...
Page 111: ......