53
/57
7.3.3.9
CALIBRATION
This tab groups the parameters related to the Calibration Cycle (
CFG
>>
CaLib
) of the device (see
section):
QuickTu
ne
QuickTune Mobile
Calibration cycle
•
Restore factory settings:
Allows you to define whether the device will keep the current configuration: “Keeps current settings” or
“Restores factory settings”.
•
Restore factory calibration:
Allows you to define whether the device will keep the current calibration: “Keep current calibration” or
“Restore factory calibration”.
•
System Password:
Allows you to enter the system password (see
section).
•
Configuration protection level:
Allows you to define the protection level to be used (see
section).
•
Frequency of the power grid:
Allows you to define the mains frequency: 50 or 60 Hz.
•
Displays Auto/Man selection screen on Operation Cycle:
If enabled, the Automatic/Manual Control Mode selection screen will
be displayed in the Operation Cycle of the device.
•
Displays the program selection screen to run on Main Cycle:
If enabled, the selection screen of the program to be executed will
be displayed in the Operation Cycle of the device.
•
Displays RUN screen on Operation Cycle:
If enabled, the
RUN
parameter will be displayed in the Operation Cycle of the device.
•
Enables Bluetooth interface:
Allows you to enable the Bluetooth interface.
•
Device SSID:
Allows you to define a SSID for the device. Up to a limit of 8 characters.
7.3.4
FAVORITE
This screen allows you to create favorite settings for the device. This makes it easy to make changes later. See the software manual for
more information.
