49
/57
•
T2 of Alarm 1:
Allows you to define a second time interval for triggering Alarm 1. Range: 0 ~ 5999 (in seconds).
•
Flash in Alarm 1:
Allows you to define whether Alarm 1 will display an alert flag on the display when it is in an alarm situation (see
section).
•
LBD Time for Alarm 1:
Allows you to define an LBD time for Alarm 1 (see
LOOP BREAK DETECTION (LBD) FUNCTION
section).
7.3.3.4
ANALOG INPUT
This tab groups the parameters related to the Analog Input Cycle (
CFG
>>
IN
) of the device (see
section):
QuickTu
ne
QuickTune Mobile
Analog input cycle
•
Sensor type of the main input:
Allows you to define the sensor type of the main input (see
section).
•
Main input digital filter:
Allows you to define a filter for the main input. Used to improve the stability of the measured signal (PV).
Adjustable between 0 and 999.9. At 0, it means that the filter is off. At 999.9, it means the filter is at maximum. The larger the filter, the
slower the response of the measured value.
•
Temperature Unit:
Allows you to define the temperature unit to be used: “Celsius” or “Fahrenheit”.
•
Decimal Places:
Allows you to define the number of decimal places to be used when displaying SP and PV values:
“No decimal places”
or
“One decimal place”.
•
Offset of the main input:
Allows you to define the Offset value for the main input.