Operating and Maintenance Manual
Scientek Washer Model SW-4600GWD
Revision 4, June 2005
Scientek Technology Corporation
Tel: (604) 273-9094
11151 Bridgeport Road, Richmond, BC V6X 1T3
Fax: (604) 273-1262
2-2
2.2 AVAILABLE OPTIONS
a.
WATER TEMPERATURE BOOSTER
raises the temperature of the supply water to
185
°
F ( 85
°
C ). There are two methods available:
Steam heater: 120
o
F (49
o
C) raise to 185
o
F (85
o
C)
Electric heater: 120
o
F (49
o
C) raise to 185
o
F (85
o
C)
b.
DOOR CONFIGURATION
GUILLOTINE DOOR TYPE
Specially designed
door mechanism automatically opens and closes the door. For safety reasons the door
mechanism will automatically stop closing and will open the door automatically when
blocked by any obstruction.
TWO GUILLOTINE DOORS
This configuration allows for "pass-through"
operation of the washer: soiled side is separated from clean side. Only one door can be
opened at one time and there is a door interlock system present to eliminate the
possibility of cross-contamination by preventing both doors from being opened
simultaneously.
c.
FINAL RINSE
will be with house supplied D.I. water and can be mixed, by factory
pre-programming, with a milk lubrication agent.
d.
AUTOMATIC (LIQUID) DETERGENT DISPENSER SYSTEM
includes a
detergent pump, which can be preprogrammed to issue the correct amount of cleaning
chemical per load.
e.
AUTOMATIC (LIQUID) MILK LUBE SYSTEM
includes a milk-lube pump,
which can be preprogrammed to issue the correct amount of lubricating chemical per
load.
f.
AUTOMATIC (LIQUID) ENZYME DISPENSER SYSTEM
includes an enzyme
pump, which can be preprogrammed to issue the correct amount of enzyme fluid at the
start of wash cycle, pre-programmed to client’s specifications.
g.
PANEL MOUNTED DATA REPORT STRIP PRINTER
shows events, times and
temperatures.