Operating and Maintenance Manual
Scientek Washer Model SW-4600GWD
Revision 4, June 2005
Scientek Technology Corporation
Tel: (604) 273-9094
11151 Bridgeport Road, Richmond, BC V6X 1T3
Fax: (604) 273-1262
6-18
6.4.1.6 Common Time Settings
Parameters on this screen are common to all ten cycles.
The parameters are sorted in two list, each having it “DOWN” and “NEW VALUE” buttons.
The left list has the parameters for adjusting the overfill (fill delay), drain times, and repeat
dry. The Extra and Emergency exhaust times are disregarded.
The right list is used to set up the maximum time the system will wait (hold) for temperature
reaching the guaranteed level, before generating an alarm.
Use the respective ”DOWN” button to highlight the item you want to change and press the
“NEW VALUE” button. This will bring up a numeric keypad where you can enter a new
value.
Press “EXIT” button to go back to the Set-up menu screen.