Operating and Maintenance Manual
Scientek Washer Model SW-4600GWD
Revision 4, June 2005
Scientek Technology Corporation
Tel: (604) 273-9094
11151 Bridgeport Road, Richmond, BC V6X 1T3
Fax: (604) 273-1262
6-11
6.4 SET-UP MENU
The Set-up menu is accessed from the Main menu screen by pressing the SET-UP MENU
button. The Service switch must be in the ON position to enable this button.
The following screen will be displayed:
Two options are given:
- access to all washer settings (cycle settings and common settings)
-
- valid password is required
- access to chemical injection times and priming the chemical pumps (set for the
chemical contractor who needs no access to other washer settings)
Password codes are required to access any selection from above. The list with password codes
is supplied separately from this document.
Access to the WASHER SET-UP is allowed (with valid password) to the following users:
Supervisor, Foreman and Service
Access to the CHEMICAL SET-UP SYTEM is primarily created for the chemical contractor
to adjust the chemical injection times and prime the chemical pumps as needed. There is a
separate user Chemical created with access code that will allow access only to these settings.
Note: All other users will also have access to the CHEMICAL SET-UP SYSTEM.