Operating and Maintenance Manual
Scientek Washer Model SW-4600GWD
Revision 4, June 2005
Scientek Technology Corporation
Tel: (604) 273-9094
11151 Bridgeport Road, Richmond, BC V6X 1T3
Fax: (604) 273-1262
6-27
6.7 PASSWORD MANAGEMENT
In addition to the service key required to access the set-up and service menus, additional four
levels of access codes (passwords) have been set up for the washer’s settings that require
restricted access.
The SUPERVISOR & FOREMAN access, FACTORY access, and SERVICE access codes are
set-up with a different level of privilege.
All access codes except the factory access code can be modified through the PV600 screen, by
the supervisor or the factory access codes.
Access to Password Management Screen:
1. Turn service key ON
2. Go to Service Screen
3. Touch Top-Left corner of the screen
4. Enter the Supervisor or Factory access code, the following screen will be displayed:
5. Select the operator whose access code needs to be changed by repeatedly touching the
button.
6. Touch the ‘NEW PASSWORD’ button and enter new password for the selected
operator.
7. Touch the ‘VERIFY PASSWORD’ button to re-enter (verify) password.
If both ‘new password’ and ‘verify password’ numbers are the same there will be message
showing ‘Password changed’.
If different numbers were entered the message will read ‘New and verify passwords differ’.
Start over by entering ‘new password’.
8. Press ‘EXIT’ button to return to the Service menu.