Operating and Maintenance Manual
Scientek Washer Model SW-4600GWD
Revision 4, June 2005
Scientek Technology Corporation
Tel: (604) 273-9094
11151 Bridgeport Road, Richmond, BC V6X 1T3
Fax: (604) 273-1262
6-13
6.4.1.1 Cycle Time Settings
Select a cycle for which you want to change time parameter(s), using the “NEXT CYCLE”
button.
Use “UP” or ”DOWN” button to highlight the item you want to change and press the
“CHANGE VALUE” button. This will bring a numeric keypad to the screen, where you can
enter a new value for the item.
If the washer is equipped with the frequency speed controller for the wash pump, an option
will be available to select either HIGH speed (full pump speed) or LOW speed (approx. 65%
speed). Touch the button to toggle the selection.
After all parameter values for a particular cycle have been changed, press the “ACCEPT”
button to accept the changes or “CANCEL” button to cancel the changes.
Select next cycle you want to modify or press “EXIT” button to go back to the Set-up menu
screen.