MM-380A
11. Maintenance
11-3
4)
Insert one thin non-conductive rod into the groove (position (A) in the figure) between
the battery and the holder.
5)
Insert another thin insulator rod into the groove (point(B) in the figure) and use both to
lever the battery out completely.
6)
Making sure that the battery’s positive side faces up, firmly push the new battery into
the battery holder.
7)
Confirm that the battery is properly fitted in the holder.
8)
Reattach the battery cover.
9)
Fasten the battery cover with the screw.
ATTENTION
Lithium batteries contain hazardous substances. At the time of disposal,
observe the local laws and regulations.
Negative terminal
(B) Insert another thin rod into the groove.
(A) Insert a thin rod into
the groove.
Lithium battery
Battery holder
