MM-380A
6. Preparations and Connections
6-6
2) Plug the multiconnector into the multiconnector on the top panel of the
MM-380A
.
3) Connect the force sensor and the force sensor amplifier.
CAUTION
•
Before measuring the force, be sure to set the force sensor's offset to "0."
Note that you must at this time make sure that no force is applied to the
sensor.
A force sensor with a voltage output in the
±
10 V range can be used. (The
LA-1022
from TOYO SOKKI, for example, can be used.)
Multiconnector
Zoom
