MM-380A
8. Operation Screens
8-38
p.
DATA READ screen
No.
Item
Description
(1)
Loaded data
display
Shows the list of measured values stored in the built-in
flash memory.
This screen allows you to load the measured values stored
in the built-in flash memory.
History
(HISTORY)
Pressing operation button A displays the
HISTORY screen.
Scroll
(SCROLL)
Pressing operation button C and turning
the encoder clockwise or counterclockwise
scrolls the screen down or up.
Select
(SELECT)
Pressing operation button D makes it
possible to select data, showing the cursor
that encloses the on-screen history line by
line. You can move the cursor by turning the
encoder clockwise or counterclockwise.
To load measured values, all cycles and
waveforms from the flash memory built into
the
MM-380A
, move the cursor to a
desired measured value and press operation
button E (READ). At this time, SELECT does
not scroll the screen. Therefore, scroll the
screen first, and then make a selection.
Pressing operation button D again cancels
SLCT.
(2)
Function keys
Load/Delete
All
(READ/AL
DEL)
When data selection is made possible by
operation button D, READ appears. In this
condition, select desired data using the
encoder and press operation button E. This
loads the selected data from flash memory.
Note that this operation will clear the
history data.
If no measured value is selected, AL DEL
appears. In this condition, press operation
button E. This displays DELETE in
operation button D, and CANCEL in
operation button E.
Selecting DELETE clears all measured
values from the built-in flash memory;
selecting CANCEL leaves the measured
values uncleared.
(2)
(1)
Can be switched
between READ
