MM-380A
7. Basic Operation
7-3
b. Moving the Cursor and Changing Parameters
1) Turning the encoder clockwise or counterclockwise, move to the input field of the
desired parameter. You can move the cursor to the right or down by turning the
encoder clockwise and to the left or up by turning it counterclockwise.
In this screen example, the cursor is at the TRIGGER input field. The cursor
moves to the input fields of MODE, CURRENT and so on as you turn the encoder
clockwise.
2) Press the encoder to select an input field and make it ready for entry.
The parameter input field is selected, turning its background blue.
3) Turning the encoder clockwise or counterclockwise, show the desired value.
When the parameter is numerical, the value increases as you turn the encoder
clockwise and decreases as you turn it counterclockwise. When the parameter is
an option (item), the next item appears as you turn the encoder clockwise, and the
previous item appears as you turn it counterclockwise.
4) Press the encoder.
This sets the selected value for the parameter, turning the input field background
back to yellow.
Current cursor position
(Input field highlighted in yellow)
Select an input field
(ON when highlighted in blue)
In the figure, AUTO is
selected by turning the
encoder clockwise once.
