39
9. Place a piece of cardboard or cloth rag below the Connector Arm to
protect the floor.
10. Using the supplied Removal Plate and Hardware, attach it to the Con-
nector Arm and tighten ONLY until hardware is snug.
11. Using a 10 mm wrench, gradually tighten the Removal Plate Hard-
ware equally between the two screws until the Connector Arm discon-
nects.
Be sure the area is clear below the Connector Arm except
for floor protection. Do not try to catch the Connector Arm.
The Connector Arm will suddenly disconnect and fall.
12. Remove the hardware from the Removal Plate using the 10 mm
socket and wrench.
