Schweitzer Engineering Laboratories SEL-387-0, Instruction Manual

Page: 352 / 568

2
SEL-387-0, -5, -6 Relay Instruction Manual
Date Code 20050919
SEL-387 Relay Command Summary
MET H Generate harmonic spectrum report for all input currents, showing first to fifteenth harmonic levels in secondary
amperes.
MET P k Display peak demand metering data, in primary amperes. Enter number k to scroll metering k times on screen.
MET RD n Reset demand metering values ( n = 1, 2, 3, 4, A).
MET RP n Reset peak demand metering values ( n = 1, 2, 3, 4, A).
MET SEC k Display metering data (magnitude and phase angle), in secondary amperes. Enter number k to scroll metering k
times on screen.
MET T Report temperature values of up to 24 RTD inputs (SEL-387-5 and SEL-387-6 Relays only).
QUI Quit. Returns to Access Level 0. Returns front-panel LEDs to the default targets.
SER d1 Show rows in the Sequential Events Recorder (SER) event report for date d1 .
SER d1 d2 Show rows in the Sequential Events Recorder (SER) event report from date d1 to d2 . Entry of dates is dependent
on the Date Format setting DATE_F (= MDY or YMD).
SER m n Show rows m through n in the Sequential Events Recorder (SER) event report.
SER n Show the latest n rows in the Sequential Events Recorder (SER) event report.
SER C Clear the Sequential Events Recorder (SER) event reports from memory.
SHO n Show relay group n settings. Shows active group if n is not specified.
SHO G Show relay global settings.
SHO P Show port settings and identification of port to which user is connected.
SHO P n Show port settings for port n ( n =1, 2, 3, 4).
SHO R Show Sequential Events Recorder (SER) settings.
STA Show relay self-test status.
STA C Clear relay status report from memory and reboot the relay.
TAR n k Show Relay Word row n status ( n = 0 through 41). Enter number k to scroll Relay Word row n status k times on
screen.
Append F to display targets on the front panel, second row of LEDs.
TAR R Return front-panel LED targets to regular operation and reset the tripping front-panel targets.
All commands that begin TFE apply to the SEL-387-5 and SEL-387-6 Relays
TFE Displays cumulative and individual through-fault event data. The twenty (20) most recent individual events are
displayed.
TFE n Displays cumulative and individual through-fault event data. The n most recent individual events are displayed,
where n = 1 to 1200.
TFE A Displays cumulative and individual through-fault event data. All the most recent individual events are displayed,
up to 1200.
TFE C Clears/resets cumulative and individual through-fault event data.
TFE P Preloads cumulative through-fault event data.
TFE R Clears/resets cumulative and individual through-fault event data.
All commands that begin THE apply to the SEL-387-6 Relay
THE Displays a thermal monitor report that indicates the present thermal status of the transformer.
THE n Displays saved thermal monitor report n where n = 1 is the most recently saved report.
THE C Clears the hourly profile, daily profile, and thermal event data archives.
THE D x y Retrives daily profile data from day x to day y .
If x and y are omitted, retrieves entire profile data.
If x or y is omitted, retrieves profile from day x ( y ) to present.
Access Level 1
Commands
The Access Level 1 commands primarily allow the user to look at information
(e.g., settings, metering, etc.), but not to change it. The screen prompt is: =>