SCHUNK JGP-P, Assembly And Operating Manual

Page: 4 / 68

Table of Contents
5.4.2 Setting dimensions for magnetic switches ............................................. 31
5.4.3 Switch-off hysteresis for magnetic switches .......................................... 32
5.4.4 Setting dimensions for position sensors................................................. 32
5.4.5 Mounting inductive proximity switch IN ................................................ 33
5.4.6 Mounting MMS 22 magnetic switch....................................................... 35
5.4.7 Mounting programmable MMS 22-PI2 magnetic switch........................ 36
5.4.8 Mounting programmable MMS 22-P 22 magnetic switch...................... 37
5.4.9 Mounting MMS 22-PI1 programmable magnetic switch........................ 38
5.4.10 Mounting the magnetic switch MMS 22-IOL.......................................... 39
5.4.11 Mounting analog MMS 22-A magnetic switch ....................................... 41
5.4.12 Mounting analog position sensor APS-Z80............................................. 43
5.4.13 Mount the flexible position sensor FPS .................................................. 44
5.4.14 Mounting analog position sensor APS-M1 ............................................. 46
6 Troubleshooting ..................................................................................................... 47
6.1 Product does not move ...................................................................................... 47
6.2 Product is not executing the complete stroke ................................................... 47
6.3 Product opens or closes abruptly ....................................................................... 47
6.4 Product does not achieve the opening and closing times .................................. 48
6.5 Gripping force is dropping .................................................................................. 48
7 Maintenance .......................................................................................................... 49
7.1 Notes .................................................................................................................. 49
7.2 Maintenance intervals........................................................................................ 49
7.3 Lubricants/Lubrication points (basic lubrication) .............................................. 50
7.4 Lubricate product ............................................................................................... 50
7.5 Replace seals ..................................................................................................... 51
7.5.1
Replace seal (variant without gripping force maintenance) ....................... 51
7.5.2 Replace seal (variant with gripping force maintenance "O.D. gripping") ... 52
7.5.3 Replace seal (variant with gripping force maintenance "I.D. gripping")..... 54
7.6 Installation position of the magnets in the piston.............................................. 55
7.7 Tightening torques ............................................................................................. 56
7.8 Assembly drawing............................................................................................... 57
8 Translation of original declaration of incorporation ................................................ 61
9 Annex to Declaration of Incorporation .................................................................... 62
4 02.00 | JGP-P | Assembly and Operating Manual | en | 1469637