SCHUNK DPG-plus 100, Assembly And Operating Manual

Page: 53 / 80

Maintenance
28.00 | DPG-plus | Assembly and Operating Manual | en | 389031
53
Mounting cylinder
piston for size 40 - 100
• Dimensions of assembly device, Sizes 40 - 100 [
}
63].
Ø
Grease and install device (100).
Ø
Push the cylinder piston (60/72) with seal (30) and the
compression spring (25) into the housing (1) from below,
observing the correct installation position. Ensure that the
sealing lips of the seal (30) do not become damaged while
pushing in the cylinder piston (60/72).
Ø
Carefully pull the device (100) over the cylinder piston and
mount onto the housing (1) with the screws (101).
Ø
Tighten screw (45) to the required tightening torque,
Tightening torque for screws [
}
62].
Ø
Remove device (100).
Ø
Complete the assembly, see following section, "Final assembly".