SCHUNK DPG-plus 100, Assembly And Operating Manual

Page: 61 / 80

Maintenance
28.00 | DPG-plus | Assembly and Operating Manual | en | 389031
61
Ø
Do not screw the screw (42) completely into the cover (12). The
gap between the side cover (12) and the housing (1) should be
approximately divided in half.
Ø
Allow the product to run approx. 20 cycles in order to center
the side cover (12).
Ø
Tighten the screws (42) to fasten the side cover (12).
Ø
Only for previous version: Apply a strip of Plast-o-Seal along
the side cover (12),
Position of the Plast-o-Seal (previous version) [
}
62].
Ø
Previous version: Insert the seal (37/20) into the housing (1).
Successor version: Insert the flat seal (20) into the housing (1).
Ø
Screw the cover plate (5) on tight with the screws (47).