manualshive.com logo in svg

Schiller DEFIGARD Touch 7, User Manual

Share
Download
Schiller DEFIGARD Touch 7 User Manual Download Page 49

Page 49

Monitoring

4

User guide

Diagnostic ECG (R-ECG)

4.5

A

rt.

 no.

:  0-48-

0227

  Rev.:

 g

DEFIGARD/PHYSIOGARD Touch 7

4.5 Diagnostic ECG (R-ECG)

1. Apply the electrodes of the 10-wire ECG cable as shown in 

Fig. 4.5

.

2. Connect the patient cable to the ECG signal input.
3. Press the button R-ECG and:

– the icon on the top changes from “Rhythm” to “Diagn.”
– the lead placement screen appears, showing leads off with red circle.

4. Press Next:

– the patient information dialogue is displayed for entering patient data if required

5. Press Next:

– the “ECG acquisition in progress” screen appears.

6. It takes about 15 seconds to record the ECG. After acquisition, the “Send” and

“Print” buttons are active. After about 8 seconds, the button “NEW R-ECG” is dis-
played so that another resting ECG can be recorded, if necessary.

7. It is now possible to scroll the R-ECG in the x-y axis for reviewing.
8. Transmit the ECG with following options:

Press ”Send” to transmit the file via the defined transmission path e.g GSM/3G/
Wi-Fi, Bluetooth to:

– SEMA
– e-mail
– USB storage

Press “Print” to print the ECG to an external Bluetooth printer.

Press “Interpr.” to open the interpretation information.

Press ”Measur.” to open the measurement information

• If transmission of the data fails, the error icon appears in the top right status bar.

The failed transmitted data can be re-sent in the main menu “R-ECG”.

• If you close the R-ECG Window without sending the data, the data can be re-sent

via the main menu “R-ECG”.

For detailed information about the transmission, see chapter 

4.6

 page 

50.45

• The resting ECG speed displayed on the recording depends on the configured 

printout- or pdf format (see 

chapter 4.4.10 Print and pdf formats, page 48

).

• To display all 12 ECG leads see 

chapter 4.1.1 View selection, page 37.

Diagn

.

R-ECG

Send

New R-ECG

Print

Close

Interpr.

Measur.

Summary of Contents for DEFIGARD Touch 7





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands