manualshive.com logo in svg

Schiller DEFIGARD Touch 7, User Manual

Share
Download
Schiller DEFIGARD Touch 7 User Manual Download Page 117

Page 117

Maintenance

10

User guide

Update Software

10.3

A

rt.

 no.

:  0-48-

0227

  Rev.:

 g

DEFIGARD/PHYSIOGARD Touch 7

10.3 Update Software 

Select 

Menu > Control Panel > Software update.

This function is only used for updating the software.The software can be updated via
Wifi (update Server) or USB interface (memory stick). 

10.3.1

Update via USB

The USB stick needs to have a memory of at least 32 MB. 

1. Connect the USB stick.
2. Switch on the device and make sure that it is connected to the DC supply or that

the battery is charged sufficiently. The device must not switch off during the up-
date!

3. Select the parameter 

Software update 

and start the update by selecting the de-

sired update source. During update, a progress bar is displayed.

4. As soon as the update is finished, the device switches off.
5. Switch the device on again and enter the 

Menu > Control Panel > Software up-

date > Current software version 

to verify that the software has been installed.

10.3.2

Update via Server

Required accessories

• Wifi or GSM/3G connection to the update server.

Update

1. Switch on the device and make sure that it is connected to the DC supply or that

the battery is charged sufficiently. The device must not switch off during the up-
date!

2. Select the parameter 

Software update 

and start the update by selecting the de-

sired update source. During update, a progress bar is displayed.

3. As soon as the update is finished, the device switches off.
4. Switch the device on again and enter the 

Menu > Control Panel > Software up-

date > Current software version 

to verify that the software has been installed.

Software updates must only be performed by authorized personnel.

The device initiates by itself regularly or on schedule a connection to the server to
check for available updates.

Summary of Contents for DEFIGARD Touch 7





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands