manualshive.com logo in svg

Schiller DEFIGARD Touch 7, User Manual

Share
Download
Schiller DEFIGARD Touch 7 User Manual Download Page 16

1

Safety notes

1.12 Display Symbols/Indicators

Page 16 

A

rt.

 no.

:  0-48-

0227

  Rev.:

 g

DEFIGARD/PHYSIOGARD Touch 7

1.12 Display Symbols/Indicators 

1.12.1

Symbols Used in this User Guide

The safety level is classified according to ISO 3864-2. The following overview
contains the safety symbols and pictorals used in this user guide.

Touch-sensitive areas

This symbol is used to designate touch-sensitive areas that might not be self-evident.

Touch (to open/close menus and perform functions)

Move up or down.

Move to the right or left

For a direct danger which could lead to severe personal injury or to death.

For a possibly dangerous situation, which could lead to heavy bodily injury or to death.

For a possibly dangerous situation which could lead to personal injury. This symbol is
also used to indicate possible damage to property.

For general safety notes as listed in this section.

Used for electrical dangers, warnings and other notes in regarding operation with
electricity.

NOTE

 for possibly dangerous situations which could lead to damages to property or

system failure or 

IMPORTANT

 for helpful user information.

Reference to other guidelines

Summary of Contents for DEFIGARD Touch 7





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands