manualshive.com logo in svg

Schiller BR-102 PLUS, User Manual, Page: 2 / 76

Share
Download
Schiller BR-102 PLUS User Manual Download Page 2

Address Headquarters

SCHILLER AG

Tel: +41 (0) 41 766 42 42

Altgasse 68

Fax: +41 (0) 41 761 08 80

CH-6341 Baar

[email protected]

Switzerland

www.schiller.ch

Sales and Service Information

The SCHILLER sales and service centre network is world-wide. For the 
address of your local distributor, contact your nearest SCHILLER 
subsidiary. In case of difficulty a complete list of all distributors and 
subsidiaries is provided on our internet site: 

www.schiller.ch

Sales information can also be obtained from: 

[email protected]

BR-102 plus / BR-102 plus PWA bears the CE-0123 mark (Notified Body TÜV-SÜD Produkte Ser-
vice GmbH, Ridlerstr. 65, 80339 Munich, Germany), indicating its compliance with the essential re-
quirements of the Annex I of the Medical Device Directive 93/42/EE regarding safety, functionality
and labelling. The requirements apply to patients, users and third persons who come into contact
with this device within the scope of its intended use.

Article no: 2.511076 Rev.: g 
Issue date: 13.12.21
Corresponds to: Original

Summary of Contents for BR-102 PLUS













































































Reviews:

No comments