manualshive.com logo in svg

Schiller BR-102 PLUS, User Manual, Page: 12 / 76

Share
Download
Schiller BR-102 PLUS User Manual Download Page 12

1

Safety Notes

1.11 Safety Symbols and Pictograms

Page 12 

BR-102 plus / BR-102 plus PWA

Art

. no.

: 

2.

51

1076

 Rev.

: g

BR-102 plus / BR-102 plus PWA battery type 2 x AA 1.2 V /
2700 mAh, NiMH. Use NiMH charger only. 

Do not disassemble, mutilate, incinerate, or heat. Do not short circuit
a battery. May cause burns. At the end of a battery’s life, do not
dispose in household waste. Batteries must be disposed of in a
municipally approved collection point or recycling centre. To prevent
the possibility of battery leakage, always remove the batteries from
the device when not used for prolonged periods.

                     

                            (with carrying pouch)

According DIN VDE 0470 PART 1 /EN 60529 / IEC 529

Protection against deposits of dust and protection against spray
water. (The first digit indicates the protection of the equipment against
ingress of solid foreign bodies and dust and the second digit indicates
the degree of protection of the equipment inside the enclosure from
ingress of water).

Read and follow the instructions in the accompanying documentation.

• Do not tumble dry
• Do not use bleach to clean the pouch.
• Do not iron

• Dry  Clean
• Wash the pouch at a temperature of 30° C and the cuff at 40°C.
• Select gentle or delicate cycle. 

NiMH

NiMH

IP42

Summary of Contents for BR-102 PLUS













































































Reviews:

No comments