manualshive.com logo in svg

Schiller BR-102 PLUS, User Manual, Page: 16 / 76

Share
Download
Schiller BR-102 PLUS User Manual Download Page 16

2

Introduction

2.4

Connecting the Pressure Hose and Microphone

Page 16 

BR-102 plus / BR-102 plus PWA

Art

. no.

: 

2.

51

1076

 Rev.

: g

2.4 Connecting the Pressure Hose and 

Microphone

Two hoses are compatible with the BR-102 plus: 

see Cuff and Cuff

Accessories, page 64

.

• The battery capacity indicator is detailed in the operating section

(

see Battery Status for NiMH Rechargeable Batteries, page 20

).

• Battery charging details, disposal, and safety relevant precautions

are detailed in the maintenance section (

see Battery Maintenance,

page 54).

• Battery and battery charger part numbers are detailed at the end of

this book (

see Accessories, page 63

).

The hose / microphone assembly can only be inserted in one
direction. Take care when positioning the assembly not to damage
any connectors. Do not pull directly on the hose or microphone cable. 

Position the pressure hose connector 

(a)

 and attach to the BR-102

plus / BR-102 plus PWA by gently pressing until the connector clicks
in place. If the version is with a microphone 

(c)

, the plug is combined

with the hose and the assembly is inserted into BR-102 plus / BR-102
plus PWA at the same time. 

Removing the Pressure Hose

Gently press the securing catch 

(b)

 to release and remove the hose

connector (and microphone jack plug) from the BR-102 plus / BR-102
plus PWA.

a

b

c

Summary of Contents for BR-102 PLUS













































































Reviews:

No comments