SCHEMPP-HIRTH FLUGZEUGBAU GmbH, KIRCHHEIM/TECK
Ventus-3M „Performance“
FLIGHT MANUAL
March 2019
CS 22
Revision –
4.3.1.5
o
Check condition of tail wheel:
-
steerable tail wheel:
3,0 bar (43 PSI)
-
Fixed tail wheel:
2,5 bar (36 PSI)
o
Mount the TEK probe, if present, and check TEK-line. When blowing from
the front onto the probe, the connected variometers must indicate climbing.
If equipped with tail tank (optional)
o
Check that fin tank spill holes are clear.
o
Check water ballast level in fin tank. In case of doubt, discharge ballast.
o
Check dump valve of the tail tank at the fin bulkhead for cleanness.
5