Programming
BASCP_EN
V08 | 08.2018
66
Change programmed beverages
Different parameters of the preset beverages
can be changed under this menu item. There
are various parameters depending on the be-
verage.
Only a reduced range of settings is available
for these parameters. Access to the range of
settings is restricted to service technicians.
All letters and
numbers
Pretreatment level steps:
1: Quick-brew coffee, ma-
ximum chamber opening,
compression pressure low
2: Chamber opening medi-
um, compression pressure
medium
3: Compression pressure
low
4 (Default): Compression
pressure medium
5: Compression pressure
high
6: Pre-brewing (1 ml/1 g),
pre-brewing time 2 sec,
compression pressure
high
7: Pre-brewing (1 ml/1 g),
pre-brewing time 2 sec,
compression pressure
high, wet pressing
(*) Possible with the
"Fresh milk system with
milk pump"..
Coffee beverage only
•
grind qty grinder
•
Strokes per button
•
Pretreatment level
•
water volume
•
Bypass water (service technician)
•
Brew accelerator water sequence (ser-
vice technician)
Depends on be-
verage
With milk (powdered or fresh milk)
•
Dosing time [s] hot milk
•
Dosing time [s] cold milk * (service tech-
nician)
•
Dosing time [s] milk foam
•
Milk powder flush water volume
•
Milk powder volume
•
Powder foam water volume
•
Powder foam flush water volume
•
Powder foam powder volume
Depends on be-
verage
With powder
•
Water volume [ml]
•
Powder quantity [%]
•
Temperature (water)
Depends on be-
verage
With cold water
Dosage time [s]
Depends on be-
verage
Settings are made using the slider or dial
controls :
►
Set the slider/dial control to the desired
value.
–
Slider control
Dial control
"Beverage parameters" menu item
Adjustment options
Description
Setting range
Notes
