BASCP_EN
V08 | 08.2018
39
Operation
Dispensing options
Dispensing mode
The mode of a beverage dispensing is configurable and is possible for beverages without a
recipe.
The following outlet modes are available in accordance with the beverage configuration:
•
Dosed = dispensing carried out in pre-defined quantity.
•
Press and hold = dispensing carried out while the beverage field is being pressed.
•
Start/stop = dispensing carried out by tapping the beverage field. Dispensing stops when
the beverage field is pressed again.
Stopping and cancelling beverage dispensing
The dispensing of beverages and hot water can be stopped at any time.
►
Press the
field.
The current dispensing process is stopped.
If beverages have also been preselected, these will only be cleared when the
field is
pressed. In this case, to stop the current dispensing the field must be pressed twice.
Preselection
While a beverage is being dispensed, it is possible to select further beverages, which will be
dispensed afterwards. Up to four beverages can be preselected.
CAUTION!
Hot fluid!
►
Place a cup under the beverage outlet.
►
Press the desired beverage fields.
The preselected beverages will be shown on the main screen in their dispensing order.
Preselected beverages can be deleted at any time:
►
Field -
press.
All preselected beverages will be deleted.
[DECAF] field
The prerequisite for dispensing DECAF beverages (decaffeinated beverages) is having two
mills, one of which is filled with decaffeinated beans. The field [DECAF] must be programmed
by a service technician or caretaker.
►
Place a cup under the beverage outlet.
►
Press the [DECAF] field.
CAUTION!
Hot fluid!
►
Press the desired beverage field.
The progress of the beverage dispensing will be shown on the main screen.
►
Remove the cup after the beverage has been dispensed.
See "Dispensing options" - "Stop dispensing" to stop dispensing of the beverage.
