Operation
BASCP_EN
V08 | 08.2018
28
Option 1: Side cooling unit
Connecting:
►
Connect side cooling unit with separate mains cable to the rear [A].
►
Connect level monitoring on the rear [B].
Switching on:
►
Open doors.
►
Switch toggle switch [A] to position [I].
►
Press and hold button [B] ±3 sec.
The device is switched on.
Temperature setting:
►
Press and hold button [C] until the current temperature flashes.
►
Increase the set temperature using the [B] button or reduce using the Setting button [D].
►
Button [C] saves the setting.
►
Close the door.
Option 2: Under-machine cooling unit
Connecting:
►
Connect the under-machine cooling unit at the rear using the separate mains cable
Switching on:
►
Open doors.
►
Switch on the toggle switch on the bottom.
The switch lights up green.
Temperature setting:
The temperature is preset at the factory.
The thermostat (A) is located on the rear for any necessary temperature adjustments.
►
Close the door again.
Main window touch screen
Overview
Main view:
Observe the operating instructions for the side cooling unit.
See "Operator control" - "Filling and connecting" - "Milk" - "Option: Additional cooling unit".
Be sure to observe the operating instructions for the under-machine cooling unit.
