3
PART#-31600035-LIT-SXD2110-MANUAL-REV.A
SYSTEM OVERVIEW
1. Control Unit
2. 2L or 5L Fragrance Bottle
3. 25ft./7.6m - 1/4in. Air Supply Tube
4. 9ft./2.4m - 3/8in. Output Tube
5. Collector Assembly w/ 5L Recycle Tube
6. Duct Input Assembly
7. Bottle Holding Tray
8. 4x Blue Shock Absorbent Grommet
9. 8x Large Flat Washer
10. 1/4in. “Y” Quick Disconnect Fitting
11. 2L Recycle Tube
12. Barb Fitting
13. Check Valve
14. 1/4” Quick Disconnect Fitting
15. 12x #8 Plastic Drywall Anchor
16. 14x Sheet Metal Screw
17. 12x Wood / Machine Screw
18. 10x Concrete Screw
19. 6x 1/4” Retaining Clip
20. 8x Zip Tie
INSTALLATION
Determine Proper Mounting Location
Always review the air flow characteristics of the property before starting an installation. Most
properties have well designed air flow to ensure proper heating and cooling. If air flow is
such that the property is properly heated and cooled, it will then evenly distribute the scent to
the same area.
Identifying which air handlers service the target area is required for proper installation. This
information can come from working with property engineers, obtaining mechanical drawings
of the property or completing an on-site inspection and physically locating duct runs. It is
important to understand the air handlers and air duct system of the facility to avoid putting
scent in areas where it is not wanted.
The ScentStream™ scent delivery system is most often installed at or near the air handler
or specific duct to scent a certain area. To ensure the effective distribution of fragrance, the
air handling fan must be set to run on a continuous cycle. If the HVAC fan is allowed to
switch on and off (AUTO setting on thermostat), we offer an optional Pressure Sensor Kit that
enables the control unit to detect whether the fan is on or off.
1
2
3
4
5
6
7
11
8
9
10
12
13
14
15
16
17
18
19
20
