11
PART#-31600035-LIT-SXD2110-MANUAL-REV.A
PROGRAMMED EVENTS
Use the
Event
menu to schedule programmed events to operate the system during specific
hours. You may program up to 14 events each of which can be set to occur on multiple days
of the week. Events can be added, deleted, reviewed, and changed from this menu.
•
Press any button to activate the screen if the backlight is off.
•
Press MODE once from the main screen to navigate to the
Set Event
screen, the words
“
Set
” and “
Event
” will be shown on the screen. The selected event number will always
be shown in this mode. Upon entering
Set Event
, the event number will be showing an
‘empty’ event with dashes displayed for the time.
•
Press SELECT to begin editing
Event 1
. The days of the week will begin to blink.
•
Press UP / DOWN to change to the desired day(s) for the event to take place.
Continuing to press UP / DOWN will show various combinations of days, there are 17
options, including 7 for the individual days (Press UP first) and 10 other combinations
(Press DOWN first). The default with all days flashing would create an event that is
active every day of the week.
•
Press NEXT to navigate to each of the four digits of the
On Time
, the words “
Set
” and
“
On
” will be shown on the screen. Press UP / DOWN to set the desired
On Time
. This
will be when the system will start to produce fragrance for this event.
•
Press NEXT to navigate to each of the four digits of the
Off Time
, the words “
Set
” and
“
Off
” will be shown on the screen. Press UP / DOWN to set the desired
Off time
. This
is the time that the system will end operation for this event.
NOTE: If the Off Time is earlier than the On Time the machine will understand that the
event will run past midnight and turn off the next day.
•
Press NEXT to navigate to the
Scent Intensity
screen for Event 1. Press PREVIOUS
/ NEXT to go back and forth between any of the settings for the current event. More
information on
Scent Intensity
can be found on the next page.
•
Press SELECT to accept all current event settings and return to the Main screen. The
display screen backlight will blink to indicate the event was saved OR display “
Error
” if
there was a problem with the event times.
•
Press MODE at any point before pressing SELECT to discard the current changes and
return to the review of existing events.
NOTE: If error was displayed the system will remain in edit mode so the current event
can be corrected without losing any of the information already entered.
NOTE: After saving an event the system will automatically display the next empty event
number, so multiple new events can be added one after another with minimum effort.
GLOSSY
CLEAR
WINDOW
GLOSSY
CLEAR
WINDOW
GLOSSY
CLEAR
WINDOW
GLOSSY
CLEAR
WINDOW
