14
PART#-31600035-LIT-SXD2110-MANUAL-REV.A
Event Rules
The ScentStream™ allows combinations of events with different scent intensity, scent time and
scent level. An event can occur inside another event, for instance, you could establish a low
scent level for the entire workday MON - FRI from 08:00-17:30 hours as Event 1, then add
Event 2 with a high scent level during your busiest hours on MON from 14:00-16:30 hours.
It is NOT possible to save an event that overlaps an existing event or has the same start or
stop times. If you have an event that runs every day from 21:00 to 05:00 the next morning,
you cannot add an event that runs from 04:00 to 15:00, because it overlaps and would
not clearly define the scent levels for the overlap. The display screen backlight will display
“
Error
” if there was a problem with the event times. If error was displayed the system
will remain in edit mode so the current event can be corrected without losing any of the
information already entered.
Set the Pump Speed
This menu allows the
Pump Speed
to be adjusted between two settings. This allows for dual
collector settings. The
Pump Speed
will be the same for all fragrance events.
•
Press any button to activate the screen if the backlight is off.
•
Press MENU three (3) times from the main screen, the words “
Set
”, “
Pump
” and
“
Speed
” will be displayed along with the current pump speed value. Press SELECT to
edit the setting. This will cause the
Pump Speed
field to blink. Press UP / DOWN to
adjust the amount from 1 or 2.
•
Press SELECT to confirm and save the changes or press MENU to discard any changes.
GLOSSY
CLEAR
WINDOW
