16
PART#-31600035-LIT-SXD2110-MANUAL-REV.A
SYSTEM OVERRIDE – MANUAL OPERATION
Pressing SELECT while the system is operating during a programmed event will temporarily
stop the system, displaying
Auto
,
HVAC
,
OFF
and the current Day of the Week and Time.
Pressing SELECT when the system is not running will turn it
ON
using the last setting.
Automatic operation will resume at the start of the next event.
You may also check the current
Scent Levels
or temporarily change the
Scent Time
and
Scent Level
during a running programmed event. Press PREVIOUS / NEXT or UP / DOWN
to view or edit the current scent settings displayed with the
Scent Time
blinking. Press
SELECT to save any changes or MODE to exit without saving.
While the machine is in auto mode the changes will only work for the duration of the current
event. Permanent changes to events must be made from the
Set Event
menu as described
above under “Reviewing, Editing and Deleting a Previously Set Event”.
If no events are running (“
Auto
” not displayed) you may press the SELECT button to activate
the system and start atomizing fragrance in always on mode. The screen will show the word
“
ON
” but not “
Auto
”. This special run state will be active, even if power is disconnected
from the machine, until events are added or the machine is switched off by pressing the
SELECT button again from the main display.
