SBS AT10.1 SERIES, Operating And Service Instructions

Page: 97 / 104

APPENDIX E
91
COMMUNICATIONS MODULE
ONLINE SUPPLEMENTS
Operating Instructions http://www.ATSeries.net/PDFs/JA0102-04.pdf
Field Installation
http://www.ATSeries.net/PDFs/JD5008-00.pdf
OVERVIEW
Your AT10.1 Microprocessor-controlled Float Battery Charger features
provisions for an optional Communications Module, which allows user's to remotely
monitor and control the charger over a serial connection. This option supports
DNP3
Level 2 and Modbus protocols over RS-232 or RS-485 half-duplex. With this option
installed, industry-standard Supervisory Control And Data Acquisition ( SCADA )
systems will be able to control, monitor, and log the events of the AT10.1.
Using the Communications Module option, all features of the AT10.1 front
instrument panel display are accessible remotely. Remote battery temperature (°C)
monitoring is also available with the Communications Module. This particular feature
is
not accessible from the standard AT10.1 front panel display.
Installed from the factory, the AT Series Communications Module (option p/n
EJ5037-0#
), includes a Communications PC Board (A12) with a dc power supply
ballast resistor (R29). A special AT Series Communications Module Operating
Instructions (
JA0102-04
), and field installation instructions (
JD5008-00
), are also
provided for user support. A field retrofit kit (p/n EJ5037-1# ) for AT Series
Communications is also available for AT10.1s installed and already in use.
An optional Ethernet Gateway interface for AT Series Communication is
available for either DNP3 Level 2, or Modbus protocols. Also available is a fiber optic
modem kit with interconnection cable. Contact your sales representative to place an
order for the AT Series Communication Module and/or accessories. Refer to the table
below for ordering information.
Description Part No.
Installed Communications Option for 12 Vdc AT10.1 EJ5037-01
Installed Communications Option for 24 Vdc AT10.1 EJ5037-02
Installed Communications Option for 48 Vdc AT10.1 EJ5037-03
Installed Communications Option for 130 Vdc AT10.1 EJ5037-04
Spare A12 Communications PC Board ( EN5004-00 ) EJ1243-12
Field Kit Communications Module for 12 Vdc AT10.1 EJ5037-11
Field Kit Communications Module for 24 Vdc AT10.1 EJ5037-12
Field Kit Communications Module for 48 Vdc AT10.1 EJ5037-13
Field Kit Communications Module for 130 Vdc AT10.1 EJ5037-14
Ethernet Gateway Interface for Modbus AT Comm EJ5226-0#
Ethernet Gateway Interface for DNP3 L2 AT Comm EJ5226-1#
Fiber Optic Modem w/Interface for AT Comm EJ5230-0#