INSTALLING THE AT10.1
6
1.5.2. Floor-Mounting the AT10.1
Floor-mounting is the standard means of installing the AT10.1 Style-5018
enclosure. When floor-mounting the AT10.1, consider the following:
1. Refer to the outline drawing (
JE5026-00
) in Appendix C on page 74 for the
overall footprint of the Style-5018 enclosure.
2. Be conscious of planned ac input and dc output wiring to the AT10.1,
selecting conduit entrances carefully. Note the standard pre-fab conduit
knockouts located on the sides of the enclosure.
3. The
location:
•
Should be free of drips and splatter. If falling particles and liquids are a
problem, install NEMA-2 type drip shield accessory (
EI0191-02
). For
kit availability, see ordering information in Appendix B on page 71.
•
Should be between 0 and 122 °F / -18 and 50 °C, with relative humidity
between 5% and 95% non-condensing.
•
Must be free of flammable or explosive materials.
4. Maintain at least 6in / 152mm of free air on all vented surfaces for cooling.
5. Allow at least 36in / 914mm front clearance for access to the AT10.1 for
operation and maintenance.
NOTICE
If you are floor-mounting the AT10.1 in a Style-5017 enclosure, a floor-
mounting bracket accessory (
EI0192-00
) is required. For kit availability
see ordering information in Appendix B on page 71. The kit includes
brackets that elevate the top of the AT10.1 approximately 47in / 1194mm
above floor level, with provisions for floor anchoring. The kit also
includes
special hardware and
Installation Instructions
(
JA0083-00
)
for the
floor-mounting procedure.
Summary of Contents for AT10.1 SERIES
