SBS AT10.1 SERIES, Operating And Service Instructions

Page: 5 / 104

IMPORTANT SAFETY INSTRUCTIONS
i
PLEASE READ AND FOLLOW
ALL SAFETY INSTRUCTIONS
NOTICE
1. Before using the AT10.1, read all instructions and cautionary markings on:
A) this equipment, B) battery, and C) any other equipment to be used in
conjunction with the AT10.1.
2. This manual contains important safety and operating instructions, and should
therefore be filed for easy access.
3. Remove all jewelry, watches, rings, etc. before proceeding with installation or
service.
4. Maintain at least 6in / 152mm of free air on all vented surfaces for cooling.
Allow sufficient clearance to open the front panel for servicing.
5. Connect or disconnect the battery only when the AT10.1 is off, to prevent
arcing or burning.
6. Do not operate the AT10.1 if it has been damaged in any way. Refer to
qualified service personnel.
7. Do not disassemble the AT10.1. Only qualified service personnel should
attempt repairs. Incorrect reassembly may result in explosion, electrical
shock, or fire.
8. Do not install the AT10.1 outdoors, or in wet or damp locations, unless
specifically ordered for that environment.
9. Do not use the AT10.1 for ANY purpose not described in this manual.
!
WARNING
10. Do not touch any uninsulated parts of the AT10.1, especially the input and
output connections, as there is the possibility of electrical shock.
11. During normal operation, batteries may produce explosive gas. Never smoke,
use an open flame, or create arcs in the vicinity of the AT10.1 or the battery.
12. Turn the AT10.1 off before connecting or disconnecting the battery to avoid
shock hazards and/or equipment damage.
13. De-energize and lock out all ac and dc power sources to the AT10.1 before
servicing.
14. Do not operate the AT10.1 with any power source that does not match the
specified ac and dc voltage ratings. Refer to the data nameplate decal affixed
to the outside panel for operational requirements.
15. Do not operate the AT10.1 with the Plexiglas safety shield or any other
supplied guards removed or improperly installed.