Hardware Manual PCD1.M2110R1 │ Document 27-619 │ Version ENG 04 │ 2018-08-20
Saia-Burgess Controls AG
CPU Properties PCD1.M2110R1 (Room)
CPU / Control Process Unit
3-1
3
3
CPU / Processor Unit
3.1
CPU Properties
PCD1.M2110R1 (Room)
Basic unit
PCD1.M2110R1
General Features
I/O bus extension
No
Number of inputs/outputs or I/O
module slots
up to 40
1)
Processor
MCF5373L / 234 MHz
Firmware, firmware update (firmware
memory soldered on)
Can be downloaded from Saia PG5
®
environment
Programmable with Saia PG5
®
V2.1.030 or higher
RAM expansion
128 Kbyte
Code/Text/DB
256 Kbytes
write-protected)
Backup memory
integrated in the file system
User file system
8 Mbyte
Hardware time precision
Yes, deviation less than 1 min/month
Data backup
Renata CR2032 lithium battery, 1…3 years
2)
Digital inputs
Max. Input frequency
4
1 kHz
3)
Digital outputs
Max. 10 (1 relay)
Interfaces
Programming interface
USB
4)
Optional serial data interface Port 1
to Slot A
1 × PCD7.F1xxS module
RS-232, RS-422/485, MP-Bus or Bluetooth
Port 0 RS-485 (X3 terminal block),
up to 115 kbit/s
Ether-S-Net interface
2 Port Switch
Field bus connections
Serial-S-Net
1)
With digital I/O modules PCD2.E16x or PCD2.A46x, each with 16 I/O
2)
The specified time period is a buffer time, which depends on the ambient temperature (the higher
the temperature, the shorter the buffer time)
3)
The 1 kHz applies with a pulse/pause ratio of 1:1 and is based on the overall frequency of the
inputs.
4)
The USB port is type “USB 1.1 Slave Device 12 Mbps” and can only be used for programming
and as an S-Bus slave in combination with specific software products (Webconnect, ViSi-PLUS
with S-Driver). With a USB 2.0 hub the download takes place twice as fast. It can also be used as
a serial data port, for example, in order to connect a terminal; however, this impedes the commis-
sioning and troubleshooting with the Debugger.
