105. Bevel the inboard trailing edges of the inlet
walls I1 to form a trailing edge that is 3/32”
thick. (Photo 120)
106. Carefully bend the ‘petals’ of the aft inlet duct
outward so they won’t get damaged as you
build the forward inlet ducts. Fit the inlet walls
I1 between B6T and B9T. The bottoms of I1
should be 7/16” above the top of K1. (Photo
121)
107. Finish the inner face of the inner duct walls.
Do not finish the top and bottom edges. The
Bristol paper ducts will be glued to the top and
bottom of the duct walls and this needs to stay
bare, unfinshed balsa. Glue the inner duct
walls I1 to B6T and the aft inlet duct.
Glue a 11/32” wide strip of 3/32” contest balsa
sheet to the top of K1 between B6T and B9T.
(Photo 122)
Photo 120
Photo 121
Photo 122
42
Savage Light Industries
F-106 Delta Dart
