124. A good place to mount the retract air tank is
above the battery tray BT1. Stick a piece or
two of velcro to the top of BT1 and a matching
piece to the side of the air tank. (Photo 139)
125. Cut a 1/4” x 12” slot in a piece of 3/32”
contest balsa. Apply medium-setting glue to
the tops of B9T, B10T, B11T and B12T and to
the tops of the 1/8” stringers and the tops of
FS1, FS2 and FS3. Align the slot in the top
sheeting and press it into place. Use masking
tape to hold the top sheeting in place. (Photo
140)
126. Fit the vertical fin into the fin pocket and make
sure the fin is plumb. Make any necessary
adjustments to the fin pocket. (Photo 141)
Photo 139
Photo 140
Photo 141
49
Savage Light Industries
F-106 Delta Dart
