82. Glue the gussets NG2 to the top of NG1 and
the front of B4T. (Photo 96)
83. Glue two cockpit rails C1 into the slots in B3T
and B4T. (Photo 97)
NOTE: Please ignore the magnets and extra
rails, plastic wrap and masking tape shown in
the following photos. This series of photos
show an earlier design that featured a cockpit
hatch. Due to poor access to the internal
components (“like working on a ship in a
bottle”) this hatch was moved to the belly of
the airplane for easy access to the roomy
fuselage.
84. Glue the instrument panel C2 to the two cockpit
rails. Glue a 1/8” balsa stringer into the
notches in bulkheads B1T - C2 and B4T - B6T.
(Photo 98)
Photo 96
Photo 97
Photo 98
34
Savage Light Industries
F-106 Delta Dart
