130. Fit, but do not glue the inlet ramp I8
between I5 and I6. Remove I8 and sand the
trailing edge so it forms a smooth transition to
the inner duct wall. Round the front so the
incoming air has a smooth transition into the
inlet duct. Glue I8 into place. (Photo 145)
131. Sand the bottom of the 1/2” soft balsa fairing
block F2 so it matches the profile of the top of
the aft fuselage. (Photo 146)
132. Use a razor plane and sandpaper to round the
tops and sides of the aft fuselage fairing block.
Align the slot in this block with the fin pocket in
the top of the fuselage and glue the fairing
block to the top of the fuselage. (Photo 147)
Photo 145
Photo 146
Photo 147
51
Savage Light Industries
F-106 Delta Dart
